IoT Project “Smart Home” : Part 1

“Smart Home” my final year MCA project based on Internet of things . The project came from some project seen on Raspberry Pi Website .

The Project is divided into 3 parts

  1. Nodes communicate with Server
  2. Server Mosquitto which uses MQTT Protocol
  3. Android App , which  communicates with server

Each node can have the following functionalities.

  • Turn ON /OFF the multiple devices.
  • Report the current status of the device.
  • Measure the climatic conditions.
  • Detect and report user presence.

All  the above can be obtained using arduino and needed sensors but communicating with server can be very difficult so better is go with a microcontroller with supports both processor and wifi , i chose esp8266  read more about esp8266 here .

MQTT Protocol is used to communicate between nodes , server , android app

Next Part : The Node

#Esp8266 #smarthouse #iot

A post shared by Siddhu (@_itsmesid_) on


Pcb for #smarthome using #esp8266 an #iot based project

A post shared by Siddhu (@_itsmesid_) on

Leave a reply:

Your email address will not be published.